Explanation of a Landlord’s Gas Safety Inspection (Static Caravan)

A Landlord’s Gas Safety Inspection is a legal requirement for rented static caravans (although many parks now require them whether you are renting or not). It makes sure all gas appliances, pipework, and flues are safe for anyone staying in the caravan. Here’s what the engineer does during the visit:

1. Visual Checks Around The Caravan

The engineer looks over all gas appliances, the pipework, and the flue systems to make sure everything is installed correctly and in good condition. They check for damage, corrosion, leaks, or anything that could affect safety.

2. Gas Leak And Pressure Tests

The gas supply is tested to make sure there are no leaks and that the gas pressure is correct for safe operation. This includes checks at the bottle, regulator, pipework, and appliances.

3. Testing Each Gas Appliance

Every gas appliance in the caravan is checked, including:

• Boiler or water heater
• Gas fire
• Cooker or hob
• Warm air heater (if fitted)

The engineer makes sure each appliance:

• Lights properly
• Burns gas safely
• Has a stable flame
• Shuts down correctly
• Has working safety devices

4. Flue And Ventilation Checks

Static caravans rely heavily on correct ventilation. The engineer checks that:

• Flues are clear and removing fumes safely
• Vents are the right size and not blocked
• There is enough fresh air for safe combustion
This is essential for preventing carbon monoxide risks.

5. Combustion And Performance Checks

Where required, the engineer uses specialist equipment to check how efficiently the appliance is burning gas. This helps ensure:

• Safe operation
• Lower carbon monoxide levels
• Better energy efficiency

6. Safety Devices And Emergency Controls

The engineer checks:

• Flame failure devices
• Overheat stats
• Gas isolation valves
• Emergency control valve at the bottle
• Regulator condition and date

These are vital for shutting off the gas safely if something goes wrong.

7. Issuing The Landlord’s Gas Safety Record (CP12)

After the inspection, you receive an official certificate showing:

• Each appliance tested
• Whether it passed or failed
• Any defects found
• Any work needed to make it safe
• The engineer’s Gas Safe registration details

This certificate must be renewed every 12 months.

The engineer will also let you know if any repairs or parts are needed.

Note: A small number of customers have experienced problems using our on-line ordering system. We think that it is caused by customers using a VPN or using a Internet Service Provider based outside the UK. The error usually results in VAT not being shown on the final invoice or on the prices below. Should this happen to you, we will contact you to confirm the actual amount being charged for the service that you have ordered (including VAT) and that you are still happy to proceed.

Note:   The prices below are our minimum charge. Travel distances in excess of 16 miles from our base in Bridlington will usually result in an extra travel charge being incurred. Please contact our office on 01262 673012 for a quotation / further information.